Thứ Tư, 11 tháng 9, 2013

LA 3560 Ono Sokki | Thiết bị đo tiếng ồn hãng Onosokki Vietnam

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong
D5 KDC Miễu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh
Tell : 0915.980.479
        0162.999.888.7
Product Index
Overview of sound measurement
ONO SOKKI Technical Report
Product Brochures (PDF)
Outer Dimension (PDF)

Product Photo(LA-3000 series)
These sound level meters were designed with an emphasis on “measuring while listening to sound” in addition to the original features of measurement and calculation. By adding various options, the LA-3000 can be upgraded to an analyzer, a recorder, and a comparator, performing more than just a sound level meter.
You can check the proper recording of data and the condition of the object via headphones, and see the analysis waveform on the large easy-to-see screen in order to carry out reliable measurement confidently at a site that does not permit any failure. 
Measurement, recording, analysis, and checking can be performed by a single item of equipment, thereby improving the measurement efficiency substantially. 

For more detailed analysis, analysis software made by Ono Sokki is useful such as waveform analysis, sound quality evaluation, or fluctuation sound analysis.

LA-3570 Class 1 (high sensitivity type)Suitable for measuring small sounds in a sound insulating box or similar environment etc.
LA-3560 Class 1 (wide band type)Suitable for making measurements across the entire audible range
LA-3260 Class 2Suitable for measuring environmental noise up to 8 kHz
Features
  • 3.5-inch large easy-to-see screen
  • Direct keys for easy operation
  • Wide linearity range of 110 dB, no need of range switching
  • Quad-channel screen (Up to four different sound level calculation results can be displayed simultaneously.)
  • Enables to measure while listening, and record the sound under measurement
  • Adding options can upgrade the models into higher performance device to serve as an analyzer, a recorder, and a sound comparator. Measurement, recording, analysis and judgment all with the same device
  • Conforms to IEC 61672-1, JIS C1509-1

Illustration (Measurement screen formats(example), Easy display selection, Two outputs possible at a time, Auto memory)
 
Illustration (LA-3000 series Rear panel)
Specification
LA-3570LA-3560LA-3260
Applying standardIEC 61672-1: 2002 Class 1
JIS C 1509-1: 2005 Class 1		IEC 61672-1: 2002 Class 2
JIS C 1509-1: 2005 Class 2
Measurement range (IEC, JIS)A:22 to 130 dB
C:28 to 130 dB
Z:36 to 130 dB		A:27 to 140 dB
C:32 to 140 dB
Z:38 to 140 dB		A:26 to 140 dB
C:30 to 140 dB
Z:36 to 140 dB
Intrinsic noiseA:14 dB or less
C:20 dB or less
Z:28 dB or less		A:19 dB or less
C:24 dB or less
Z:30 dB or less		A:20 dB or less
C:24 dB or less
Z:30 dB or less
Frequency range (IEC, JIS)10 Hz to 15 kHz10 Hz to 20.0 kHz10 Hz to 8.0 kHz
MicrophoneMI-1211
1/2-inch bias type		MI-1235 
1/2-inch electret type		MI-1433 
1/2-inch electret type
Sensitivity level
(re. 1 V/Pa)
-20 dB ± 1.5 dB-29 dB ± 3 dB-29 dB ± 3 dB
Microphone preamplifierMI-3310MI-3230
Linearity rangeWide range: 110 dB / Normal range: 80 dB
Level range7 r
Người đăng: vào lúc Không có nhận xét nào:
Nhãn:

Thứ Hai, 9 tháng 9, 2013

FORCE / TORQUE INDICATOR MODEL 3I - Mark-10 Vietnam

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong
D5 KDC Miễu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh
Tell : 0915.980.479
        0162.999.888.7

FORCE / TORQUE INDICATOR MODEL 3I

 Data Sheet
 User's Guide
 5i / 3i Comparison Chart
Now including continuous USB output for load vs. time data collection!
The 3i digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors. With exclusive Plug & TestTM technology, all calibration and configuration data is saved within the sensor’s smart connector, not the indicator, allowing for true interchangeability. In addition, all sensors are fully compatible with other Mark-10 indicators.
The 3i shares its menu structure and most specifications with Series 3 digital force gauges. The sampling rate is 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges’ features and configurable parameters. The display also features an analog load bar for graphical representation of applied load, as well as set point indicators for pass-fail testing. USB output is provided for data collection purposes.

The 3i includes MESURTM Lite data acquisition software, for tabulation of continuous or individual data points. One-click export to Excel allows for further data manipulation.
 Use MESURTMgauge Analysis Software to tabulate, graph, and analyze test data (more info)

     Roll over image to magnify

gallery thumbnail gallery thumbnail gallery thumbnail 
gallery thumbnail gallery thumbnail gallery thumbnail
  • Interchangeable force and torque sensors through Plug & TestTM technology
  • High-speed 2,000 Hz sampling rate
  • USB data output of continuous or individual data points
  • Ultra-compact size
  • Large backlit graphic display
  • Programmable set points with pass/fail indicators
  • Live load bar graph with set point markers
  • Peak readings and set points always displayed
  • Configurable audio alarms and key tones
  • Programmable auto-shutoff
  • Configurable audio alarms and key tones
  • Battery or AC operation
  • MESURTM Lite data collection software included
  • CE mark
Accuracy: ±0.2% of full scale + sensor
Sampling rate:2,000 Hz
Power:AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.
Battery Life:Backlight on: up to 7 hours of continuous use
Backlight off: up to 24 hours of continuous use
USB Output:Configurable to 115,200 baud.
Safe overload:150% of full scale (display shows “OVER” at 110% and above)
Weight:Weight: 0.7 lb (0.3 kg)
Included items:Carrying case, universal voltage AC adapter, battery, quick-start guide, USB cable, resource CD (USB driver, MESURTM Lite software, MESURTMgauge DEMO software, and user's guide), and certificate of conformance.
Warranty:3 years (see individual statement for further details)

PLUG & TESTTM FORCE SENSORS
      
R01
S-beam force sensors, tension and compression
R02
Miniature button force sensors, compression only
R03
Inline force sensors, tension and compression
R04
Miniature S-beam force sensors, tension and compression
R05
Fully enclosed smart sensors, push and pull
PLUG & TESTTM TORQUE SENSORS
R50
Universal torque sensors
R51
Universal torque sensors with interchangeable attachments
R52
Tool calibration torque sensors
R53
Closure torque sensors
R54
Wrench extension torque sensors
R55
Wrench extension torque sensors


  • << Table top stand
    Includes mounting holes for bench mounting and angle adjustment.

  •  >> MESURTMgauge Software - tabulates and plots load vs. time or load vs. travel. Also calculates statistics, exports to Excel, and more.

ModelDescriptionUS Price
M3IForce/torque indicator, 110V$545.00
M3IEForce/torque indicator, 220V Europe$545.00
M3IUForce/torque indicator, 220V UK$545.00
M3IAForce/torque indicator, 220V Australia$545.00
Additional Items to Consider
15-1004MESURTMgauge Software$495.00
09-1165Spare USB Cable$30.00
08-1026Spare rechargeable battery$20.00
AC1030Spare AC adapter, 110V$40.00
AC1031Spare AC adapter, 220V EUR$40.00
AC1032Spare AC adapter, 220V UK$40.00
AC1035Spare AC adapter, 220V AUS$40.00
AC1008Stand, table top$150.00

IN [MM]
Người đăng: vào lúc Không có nhận xét nào:
Nhãn:
Đăng ký: Bài đăng (Atom)